Direkt zu

 

 

 gemeinsam mit

 

 

 

Unsere Medienpartner

 

 

 

banner-laser-2

 

Logo Laser Magazin

 

Laser+Photonik-4c

 

Laser Technik Journal

 

Photonik

 


 

Programm Donnerstag 14.06.

Room C1.1.2: Plenary Session
(Chair T. Graf)
KeyNote: Industrial Laser Trends - Did We Reach a Turning Point?
P. Leibinger, TRUMPF Werkzeugmaschinen GmbH + Co. KG, Ditzingen, Germany
09:00  
Photovoltaics: Where is it Going?
J. Werner, IPV, Universität Stuttgart, Stuttgart, Germany
09:30  
Laser Processing of CFRP
R. Weber, IFSW, Universität Stuttgart, Stuttgart, Germany
10:00  
 
Coffee Break
10:30  

 

Room C1.2.1: CFRP Processing and Micro Laser Applications   Room C1.2.2: High Average Power Laser Sources and Beam Delivery 
 
CFRP Laser Processing
(Chair R. Weber)
  High Average Power Lasers
(Chair M. Abdou-Ahmed)
Influence of Laser Processing on Carbon Fibres
T. Prieß, IFB, Universität Stuttgart, Stuttgart, Germany
10:50 Diode Lasers Scaling to Near 10kW
B. Acklin, Coherent Inc., San Jose, USA
Measurement of Emissions Caused by Laser Cutting of CFRP
S. Collmer, Daimler AG, Sindelfingen, Germany
11:10 Design and Performance of kW-class OEM Fibre Lasers for Manufacturing Applications
S. Norman, SPI Lasers, Southampton, UK
Modeling of Laser Ablation of CFRP – Influence of Beam Profile
M. Hafner, IFSW, Universität Stuttgart, Stuttgart, Germany
11:30 Diode Laser with Fiber Laser based Beam Quality Converter
V. Krause, Laserline GmbH, Mülheim-Kärlich, Germany
Innovative Non-Destructive Testing Methods for Fibre-Plastic Composites
P. Menner, IKT, Universität Stuttgart, Stuttgart, Germany
11:50 Fibers for Flexible High-Power Beam Delivery
A. Voß, IFSW, Universität Stuttgart, Stuttgart, Germany
 
Lunch
12:10
Lunch
 
Micro Processing and PV Applications
(Chair K. Löffler)
  High Average Power Lasers
(Chair S. Piehler)
In-situ Characterization of Ultrashort Pulse Laser Deep Drilling
S. Nolte, Uni Jena, Jena, Germany
14:00 From IR to EUV
M. von Borstel, TRUMPF Laser- und Systemtechnik GmbH, Ditzingen, Germany
Investigations of Influencing Factors on the Laser Doping Process for Solar Cells
M. Diez, Robert Bosch GmbH, Stuttgart, Germany
14:20 Recent Progress on “kW-Class” Narrow Linewidth Fiber Lasers and Amplifiers
I. Majid, Nufern, East Granby Ct, USA
Scribing CIGS Solar Cells with Ultrafast Pulsed Lasers - a Comparison of Different Approaches
T. Wahl, Manz Automation AG, Reutlingen, Germany
14:40 Fundamental-Mode Thin-Disk Lasers
B. Weichelt, IFSW, Universität Stuttgart, Stuttgart, Germany
Cutting of Transparent Hard and Brittle Materials with Picosecond Laser
B. Faißt, TRUMPF Laser- und Systemtechnik GmbH, Ditzingen, Germany
15:00 Beam Shaping: Key for High-Quality Processing
P. Harten, LIMO Lissotschenko Mikrooptik GmbH, Dortmund, Germany
 
Coffee Break
15:20
Coffee Break
 
Micro Drilling
(Chair V. Onuseit)
  Beam Delivery and Beam Shaping 
(Chair B. Weichelt)
Factors Controlling the Ablation Efficiency for Ultra-Short Pulses between 250fs and 50ps
B. Neuenschwander, Berner Fachhochschule, Burgdorf, Switzerland
15:50 Thermally Optimized Optics for High-Brightness Solid-State Lasers
S. Piehler, IFSW, Universität Stuttgart, Stuttgart, Germany
Trepaning Optics for Laser Micro Machining
A. Pauli, GFH, Deggendorf, Germany
16:10 Optical Systems and Elements for High-Power Lasers
P. Triebel, JENOPTIK Optical Systems GmbH, Jena, Germany
Ablation of Thin Aluminium Layers on Silicon
R. Gauch, Robert Bosch GmbH, Stuttgart, Germany
16:30 Independent Focus Position and Focus Diameter Control – An Optimized Laser Cutting Head for High Brightness Solid State Lasers
B. Wedel, HIGHYAG Lasertechnologie GmbH, Stahnsdorf, Germany
Fabrication of 25 µm Microholes in Metal by Helical Drilling with Ultrashort Pulsed Laser Radiation
A. Feuer, IFSW, Universität Stuttgart, Stuttgart, Germany
16:50 Delivery of 800 W of Fundamental-Mode Laser Radiation Through a 100 m Long Step-Index Multi-Mode Fiber
J. Negel, IFSW, Universität Stuttgart, Stuttgart, Germany
SLT closing note
R. Weber, IFSW, Universität Stuttgart, Stuttgart, Germany
17:10 SLT closing note
T. Graf, IFSW, Universität Stuttgart, Stuttgart, Germany
Program subject to change without notice